PIC18F chip decryption

Posted by

Now for domestic and foreign customers to provide price concessions PIC18F14K50 chip decryption service, welcome to inquire. Contact number: 13378667812
PIC18F14K50 has advanced features and special value in the embedded USB market. Low-cost PIC < microcontroller, full-speed USB2.0 compatible interface connected to the host, can automatically change the clock source and power level, making it a special device for battery-powered applications.
PIC18F14K50 characteristics
Core of high-performance PIC18
C compiler optimization framework
16K bytes FLASH
768B bytes RAM
256B data EEPROM
Self programming under software control.
Support for interrupt priority
8×8 single cycle hardware multiplier
Programmable Watchdog Timer with full speed universal serial bus interface.
USB V2.0 compatible interface
Support low speed and full speed operation
Support control, interrupt, synchronization and batch transmission.
. up to 16 endpoints (or 8 bidirectionally).
Automatic detect physical connection to USB host.
256 byte dual access RAM flexible clock options
It can be up to 48MHz at the internal frequency.
Fully tunable internal oscillator – supplies frequency ranging from 31 kHz to 16MHz – user adjustable frequency drift.
Internal 4X phase locked loop (PLL) – external or internal oscillator can be used.
Fault protection clock monitor – can be safely shutdown during oscillator failure advanced PIC microcontroller peripherals.
Dual capture/comparison/PWM interface-up to 5 PWM output-programmable dead-time, automatic shutdown/restart
Main I2C/SPI interface supports all 3 wire SPI mode address mask I2CTM compatible Master and Slave mode.
Enhanced addressable USART module support RS- 485, RS- 232, and LIN2.0
10 bit, 9 channel ADC module – you can collect and convert samples automatically – in dormancy mode.
MTouchTM Touch Compatible Simulator W/SR Latch-Rail to Rail Operations-Independent Input Multiplexing
. 25 mA GPIO irrigation / pull current.
Programmable on-chip reference voltage can be used in comparability with the comparator or ADC operating environment.
1.8 to 5.6V working area
Software programmable undervoltage reset function.
Four power management operation modes
Dual speed clock startup options
Packaging and pins: PDIP20, SOIC20, SSOP20, QFN20

PIC18F IC decryption

Posted by

Shenzhen PCBA provides all kinds of IC decryption and MCU decryption technical services, the internal characteristics of the chip and its encryption properties will be analyzed firstly. For difficult IC chips, our decryption engineers will first test the decryption scheme with empty chips to ensure that the decryption service can achieve more than 90% success. After the rate of chip opening and technical analysis, to ensure the reliability of IC decryption and customer project integrity. The following is the microchip series chip PIC18F14K50 parameters and characteristics analysis, for the majority of customers and technical engineers reference!
PIC18F14K50 overview
PIC18F14K50 has advanced features and special value in the embedded USB market. Low-cost PIC < microcontroller, full-speed USB2.0 compatible interface connected to the host, can automatically change the clock source and power level, making it a special device for battery-powered applications.
PIC18F14K50 characteristics
Core of high-performance PIC18
C compiler optimization framework
16K bytes FLASH
768B bytes RAM
256B data EEPROM
Self programming under software control.
Support for interrupt priority
8×8 single cycle hardware multiplier
Programmable Watchdog Timer with full speed universal serial bus interface.
USB V2.0 compatible interface
Support low speed and full speed operation
Support control, interrupt, synchronization and batch transmission.
. up to 16 endpoints (or 8 bidirectionally).
Automatic detect physical connection to USB host.
256 byte dual access RAM flexible clock options
It can be up to 48MHz at the internal frequency.
Fully tunable internal oscillator – supplies frequency ranging from 31 kHz to 16MHz – user adjustable frequency drift.
Internal 4X phase locked loop (PLL) – external or internal oscillator can be used.
Fault protection clock monitor – can be safely shutdown during oscillator failure advanced PIC microcontroller peripherals.
Dual capture/comparison/PWM interface-up to 5 PWM output-programmable dead-time, automatic shutdown/restart
Main I2C/SPI interface supports all 3 wire SPI mode address mask I2CTM compatible Master and Slave mode.
Enhanced addressable USART module support RS- 485, RS- 232, and LIN2.0
10 bit, 9 channel ADC module – you can collect and convert samples automatically – in dormancy mode.
MTouchTM Touch Compatible Simulator W/SR Latch-Rail to Rail Operations-Independent Input Multiplexing
. 25 mA GPIO irrigation / pull current.
Programmable on-chip reference voltage can be used in comparability with the comparator or ADC operating environment.
1.8 to 5.6V working area
Software programmable undervoltage reset function.
Four power management operation modes
Dual speed clock startup options
Packaging and pins: PDIP20, SOIC20, SSOP20, QFN20
Flying star serves the public and serves the interests of our customers. After the IC decryption, it also provides perfect after-sale service such as burning service and writing suggestions. Welcome customers at home and abroad on PIC18F14K50 chip decryption, OEM production, project cooperation and other issues to contact us!

PIC12C chip decryption

Posted by

The characteristics of PIC12C671 and the chip decryption;
Low-power high-speed CMOS EPROM / EEPROM technology, wide operating voltage range, only eight pins, with DIP and SOIC packaging form. The power consumption is only 2 mA when the working voltage is 5V, clock frequency is 4MHz, 15uA when the working voltage is 3V, clock frequency is 32 kHz, and only 1uA in standby mode, which is suitable for battery-powered handheld electronic products.
PIC12C671 main features:
35 simplified instruction sets
5 bidirectional I/O ports
Interrupt function (GP0, GP1, GP3)
. 1 8 bit programmable prescaling timer / counter
Watchdog (WDT) circuit
Online serial programming (ICSP)
1kByte read-only program memory EEPROM
4 way 8bitA/D conversion channel
Clock frequency DC-10.0MHz
128x8bit internal RAM
Power on reset function (POR)
2.5-5.5V working voltage range

PIC16c IC unlock

Posted by

Flying star chip decryption center provides PIC16C923 IC unlock  service, welcome to consult.
Microcontroller core function: high performance reduced instruction set CPU: only 35 single word instruction set learning;
. 4K * 14 on-chip EPROM program memory;
* 176 x 8 universal register (SRAM);
Except that the program branch instruction is a double-cycle instruction, all are single-cycle instructions (500ns), running speed: 8 MHz clock input DC, 500 ns instruction cycle DC;
Interruption capacity;
8 level deep hardware stack;
Direct, indirect and relative addressing modes;
Peripheral function: 25 I/O pins with independent directional control function.
25~27 input pin;
Timer 0: a 8 bit timer / counter with a 8 bit programmable prescaler.
Timer 1: A 16-bit timer/counter with a frequency divider can be incremented during sleep by an external crystal oscillator/clock.
Timer 2: 8-bit timer/counter with 8-bit periodic register, pre-divider and post-divider;
Single pin, can be configured with one acquisition input, PWM output or comparative output: 16-bit capture module, the maximum resolution of 31.25 ns;
16 bit comparison module with a maximum resolution of 500ns;
The maximum resolution of PWM is 10 bits.
When the 8 bit resolution is 32kHz and the 10 bit resolution is 8kHz, the maximum PWM frequency is the highest.
Programmable LCD timing module;
Multiple LCD timing sources are available.
LCD panel can be driven in sleep mode.
Multivariate static 1/2, 13, 1/4;
Static driver 1/3 bias capacity;
. 16 bytes of dedicated LCD memory;
Up to 32 segments and 4 columns;
SPITM and I2CTM synchronous serial port (SSP);
8 bit multichannel ADC;
The special function of the microcontroller is power on reset (POR).
Power delay timer (PWRT) and oscillator start timer (OST);
The watchdog timer (WDT) which works reliably with its own on-chip RC oscillator is used for programmable code protection.
Power saving sleep mode;
Optional oscillator options;
Online serial programming (through 2 pins).

PIC12F chip decryption

Posted by

Flying STAR chip decryption  provides PIC12F510 chip decryption  service, welcome to consult.
The characteristics of PIC12F510 are as follows:
There are only 33 words to explain.
In addition to all single cycle instruction branches planned, this is the two cycle.
12 bit width instruction
2 level deep hardware stack
Direct, indirect and relative addressing mode data and instructions.
8 bit wide data
. 10 special function hardware registers (PIC12F510)
. 13 special function hardware registers (PIC16F506)
Working speed:
DC – 8 MHz crystal oscillator
– DC – 500 ns instruction cycle
. 4 or 8 MHz optional high precision internal oscillator:
– factory calibration is + 1%.
. online serial programming ICSP
Online debugging (ICD) support.
Power on reset (POR)
Watchdog timer (WDT), reliable operation with dedicated RC oscillator.
Programmable code protection
Multiplexed MCLR input pins
Optional internal weakly pull-up I / O pin
Power saving sleep mode
Wake up from the change of pin level.
Wake up from sleep comparison changes
Modulus (A / D) converter:
– 8 bit resolution
– 4 input channel (1 channel dedicated to converting absolute reference voltage of internal 0.6V).
High pour / pull current can drive LED directly.
8 bit real time clock / counter (TMR0), with 8 bit programmable prescaler.
Working current:
– <170 micro @ 2V, 4 MHz
Standby current:
– 100 nA @ 2V, typical
Low power, high speed flash technology:
– 100000 cycle Flash endurance
> “40 year retention”
Full static design
Wide working voltage range: 2.0V to 5.5V
Wide temperature range:
– industrial grade: -40 C to +85 degree C
– Extension: -40 degrees C to +125 degrees C
6 I / O pins:
– 5 independent directional control I / O
– 1 feet input
1 analog comparators and absolute references.

dsPIC30F5015 IC unlock

Posted by

DsPIC30F5015 IC unlock scheme is mature, we dsPIC30F2010, dsPIC30F3010, dsPIC30F4012, dsPIC30F3011, dsPIC30F4011, dsPIC30F5015, dsPIC30F6010 and dsPIC30F6010A dsPIC30F series IC unlock price low, and the IC unlock cycle short. If you have dsPIC30F5015 chip decryption or other dsPIC30F MCU decryption needs, welcome to call for consultation. DsPIC30F series . brief introduction to the performance of dsPIC5015 devices:
High performance modified RISC CPU:
• improved Harvard structure
• C compiler optimized instruction set architecture
• flexible addressing mode 84 basic instructions
• 24 bit wide instruction, 16 bit wide data
• 12 KB flash memory program space
• data RAM in 512 bytes
• 1 bytes of nonvolatile data EEPROM
• 16 x 16 bit work register array
• operations up to 30 MIPS:
– the external clock input from DC to 40 MHz
– 4 MHz, 10 MHz with PLL active (4 times, 8 times, 16 times) oscillator input.
• 27 interrupts
• three external interrupts
• each interruption of the priority of 8 user options
• 4 processor exceptions and software pitfalls
The features of the DSP engine:
Mode and bit reversal mode
• two, 40 bit wide accumulators with optional saturated logic
17 bit 17 bit single cycle hardware decimal / integer multiplier
• single cycle multiplicative accumulation (MAC) operation
• 40 level bucket shift
• double fetching data
Peripherals:
High irrigation / pull current source I / O pin: 25 mA/25 Ma
• 3 16 bit timer / counter; 16 bit timer for 32 bit timer module.
• 4 16 bit capture input functions
• 2 16 bit comparison / PWM output functions
– Dual comparison mode available
• 3 line SPITM module (supporting 4 frame mode)
• the I2CTM module supports multiple patterns and 7-bit/10-bit solutions
Addressable UART module with FIFO buffer
Motor control PWM module characteristics:
• 6 PWM output channels
– complementary or independent output mode
Edge and center alignment mode
• 4 duty cycle generator
– specific 4 pattern time base
• programmable output polarity
Time control of the complementary mode of death
• manual output control
/ flip-flop synchronous A / D conversion
Orthogonal encoder interface module features:
• A phase, B and index pulse input
• 16 up / down position counter
• counting direction state
• position measurement (x2 and x4) patterns
• programmable input digital noise filter
• standby 16 bit timer / counter mode
Interruption / overflowing position counter flip
Simulation features:
• 10 analog to digital converter (A / D) and:
– 500 ksps (10 bit A / D) conversion rate
– 6 input channels
– conversion can be dormant and idle
Programmable undervoltage detection and generation reset
The dsPIC30F device contains a high-performance 16 bit microcontroller (MCU) architecture with a wide range of digital signal processor (DSP) functions. Based on the wide application of dsPIC30F2010, dsPIC30F3010, dsPIC30F4012, dsPIC30F3011, dsPIC30F4011, dsPIC30F5015, dsPIC30F6010, dsPIC30F6010A and other dsPIC30F series singlechip, the demand of the dsPIC30F series singlechip is also more and more. Flying star technology launches dsPIC30F2010, dsPIC30F3010, dsPIC30F4012, dsPIC30F3011, dsPIC30F4011, dsPIC30F5015, dsPIC30F6010 and dsPIC30F6010A and other dsPIC30F series chips to break down the price discount activities.

PIC18F25K80 PIC18F45K20 MCU crack

Posted by

PIC18F25K80 PIC18F45K20… Series MCU crack
Flying star is currently the only company in China to master the key technologies of PIC18FxxK series MCU crack.
The common MSI (microchip) and DSP chip encryption methods have been thoroughly studied by Chinese chip crackers, such as dsPIC30F3011, which can be cracked in a few hours.
Microchip began to improve the technology, the latest single-chip chips, such as: PIC18F25K80, PIC18F25K20, etc., using the latest encryption method, it is difficult to crack.
In view of the wide demand for study in the domestic market, Shanghai Sheng Electronics uses advanced technology and equipment, providing PIC18F25K80 MCU crack (the limited products through legal channels, deciphering for legal purposes), expedited the fastest 5 hours to decipher you (except for copper wire binding, that time is longer), even if not. Urgent, according to the general speed of third days, you can finish the decryption of PIC18F25K80.