SST27 MCU decryption

Posted by

SST27SF010 overview
SST27SF010 is a 128K X8 MTP low-cost flash, manufactured by SST’s patented, high-performance CMOS SuperFlash technology. The split gate cell design and thick oxide tunneling injector achieve better reliability and manufacturability than other methods. These MTP devices are electrically erasable and programmable at least 1000 times, using an external programmer powered by a 12-volt power supply. They must be erased before programming. These devices comply with JEDEC standard pins with byte wide memory.
SST27SF010 characteristics
The organizational structure is 128K X8.
4.5-5.5V read operation
Excellent reliability
Endurance: at least 1000 times.
– more than 100 years of data retention period
Low power consumption
– working current: 20 mA (typical value)
Standby current: 10 A (typical value)
Fast read access time
– 70 nanosecond
– 90 nanosecond
Fast Byte programming operation
Byte programming time: 20 s (typical value)
– chip programming time: 2.8 seconds (typical value)
Electrical erasure programming
– no UV light source is needed.
– chip erase time: 100 ms (typical value)
Compatibility of TTL I / O
JEDEC standard byte width EPROM pin
Packaging options
– 32 pin PLCC
– 32 pin TSOP (8mm x 14mm)
– 32 pin PDIP
In the research of MCU decryption technology, our company has long been focusing on high-difficulty IC decryption research, DSP SST27 MCU decryption research, CPLD MCU decryption research, FPGA MCU decryption  research and other fields. At present, we have obtained the typical project achievement in the SST series microcontroller decryption, STC series microcontroller decryption, ST series MCU decryption, NEC series microcontroller decryption and so on. Specialized decryption equipment and detection instruments can provide high-efficiency, high-quality and reliable SST27 series SST27SF010 MCU microcomputer decryption service for customers at home and abroad.

Leave a Reply

Your email address will not be published. Required fields are marked *